Acid Look
Color Stain
- Can be diluted for desired transparency
- 19 Classic Series: Color Chart
- Semi-Transparent
- 7 Old World Series: Color Chart
- Transparent
- More Earth Toned Colors
- Good for coloring carve coat/faux rocks
- Make old stamped concrete look new
- Solid Stain
- Will cover up previously colored or ugly concrete, but will still give a natural look, not painted.
- Water-based stain
- 20 Colors: Color Chart
URETHANE vs POLYASPARTIC vs ACRYLIC Sealers?
Urethane and Polyaspartic sealers are used for interior use and are known for their wear resistance and long lasting shine.
Urethane sealers are more user friendly to an inexperienced applicator due to their longer pot life. They are also easier to re-coat in the future, but re-coating is not common.
Polyaspartic sealers have the highest surface hardness of sealers making it harder to scratch. This is a great sealer for quick turn around with a fast dry time (2-3 hours). *NOTE: if a second coat is desired it must be applied under 6 hours.
Acrylic sealers are typically applied for exterior use only (e.g. stamped concrete). They are Not recommended for interior use due to their short wear life and smell during curing.
WATER BASED vs SOLVENT BASED Sealers
Water Based sealers create the shine without enhancing the color and has little to no smell. The sealer performance is equal if not better than solvent based sealers and has a high chemical resistance.
Solvent Based sealers typically have an odor until dry and will enhance the color for a darker looking floor.
What Sealer is Right for Me?
The “right” sealer for you depends on your own needs such as, the desired finished look, cure time, smell, hardness, and ability to re-coat. All of our sealers are top of the line sealers and will seal your stained floor. Feel free to call us for a recommendation.
Water-based
- Single Coat Application
- Polyaspartic User Friendly
- Walk on in 3 hours
- Fast Setting
- Low Odor
- 400 sqft/gal
- 2 coats recommended
- Creates dry look or polished concrete look
- Walk on in 6-8 hours
- Economical
- No odor
- High Chemical Resistance
- 600-800 sqft/gal (depends on dilution)
- 2 coats recommended
- Color enhances to “Pop” your floor
- Walk on in 6-8 hours
- Odor present until fully dry
- 350 sqft/gal
- Semi-Gloss Finish
- Very high abrasion & chemical resistance!
- Water Based
- Walk on in 14 hours
- Low Odor
- Low VOC
- Long pot life and working time
- 500-550 sqft/gal
Solvent-based
- Single Coat Application
- Polyaspartic User Friendly
- Walk on in 3 hours
- Fast Setting
- Low Odor
- 400 sqft/gal
- 2 coats recommended
- Creates dry look or polished concrete look
- Walk on in 6-8 hours
- Economical
- No odor
- High Chemical Resistance
- 600-800 sqft/gal (depends on dilution)
- 2 coats recommended
- Color enhances to “Pop” your floor
- Walk on in 6-8 hours
- Odor present until fully dry
- 350 sqft/gal
- Semi-Gloss Finish
- Very high abrasion & chemical resistance!
- Water Based
- Walk on in 14 hours
- Low Odor
- Low VOC
- Long pot life and working time
- 500-550 sqft/gal
