Surecrete DK 400 Solvent Based Polyurethane (Clear)

Available in Gloss or Matte. 51% solids clear urethane used as a topcoat for stained concrete, epoxy floor, or on raw concrete.  Urethanes are a very durable and easy to use product. Don’t be fooled by cheap products, quality counts.

Tip: Urethanes do smell but only for a few hours. This will color enhance the floor. I recommend 2 coats. Available in a Water Base as well.  See DK 400 WB


Dura-Kote Polyurethane WB is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing clear coating for concrete, cement based overlays, or as a top finish coat on epoxy systems. The high performance clear top coat, available in gloss or satin finish, provides the durability of a solvent base system with the ease and safety of a low VOC (73 g/L) water base system. Unlike nearly all polyurethanes, Dura-Kote Polyurethane WB has remarkable properties related to vapor permeability that permit its use in an exterior setting. Note: See paragraph 5 under Sureface Prep. Generating the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance, it is both user-friendly and extremely durable. As a vertical wall coating, it enhances anti-graffiti properties. Dura-Kote Polyurethane WB is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

For interior coatings, especially in areas or environments in which you are looking for an eco-friendly coating, Dura-Kote Polyurethane WB can be an extremely effective sealer for your concrete projects. With a VOC rating that will allow it to be placed in 99 percent of all states and municipalities, Dura-Kote Polyurethane WB is an ideal coating for generating LEED points and earning Green Projects as a professional applicator. If you’re a homeowner or DIY weekend warrior looking to do some work on your home but need to eliminate odor and lower the chemical vapor residue released by your concrete project.

Additional information


300 – 400 sqft per gallon, 4 – 5.3 mils wet, 2 – 3 mils cured


5 gallons, 1 gallon

Mixing Ratio

3:1 (3 part A to 1 part B)


There are no reviews yet.

Be the first to review “Surecrete DK 400 Solvent Based Polyurethane (Clear)”

Your email address will not be published. Required fields are marked *