Surecrete DK 180 Polyaspartic

Walk on in 3 hours! Not recommended for novices. 80% solids Polyaspartic. Used as a clear final top coat. Easy to use rolls on like a urethane Easy to use. Low VOC. Polyaspartics produce a very hard surface and have quick turnaround times.

Tip: Any recoats must be applied within 6 hrs. or a sanding screen must be used before a recoat


DK 180™ is a specially formulated 80% solids hybrid solvent based polyaspartic coating. Unlike many polyaspartics, it has a user-friendly pot life of approximately 20 minutes and the ability to create a moderate build (6 ½ mil) single coat top coat. Turnaround time for a floor may be as little as 6 – 8 hours. Epoxy flakes may be covered in a single pass. DK 180 provides a low VOC (<200 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss, moderate build wear surface. The rapid cure time eliminates excessive waiting to return a floor to service. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

Additional information


A 1 gallon – B 1 quart, A 5 gallon – B 1 gaoon

Mixing Ratio

3:1 (3 part A to 1 part B


Approximately 150 – 200 ft² per gal. (14 – 18.5 m² per 3.8 liter) 11 – 8 mils wet; 8.8 – 6.4 mils cured