For Prices and to Place an Order, Call 801-222-0808
Visit Us On TwitterVisit Us On FacebookVisit Us On Google Plus

Surecrete HS-300 (5 gal.)

please call for prices (801)222-0808

A high quality 30% solids acrylic sealer. Leaves a higher long lasting shine. Rolls out easy without roller marks and strings. Good for outside cement based overlays.

COVERAGE: approximately 200 – 240 ft²/gal., per coat

Categories: , ,




SureCrete’s HS 300 is a premium, high performance, single-component, 30% acrylic solids, 600 g/L, sealer designed for SureCrete overlays or other cement-based products. As with most acrylics it is vapor permeable and readily applies outside. However, HS 300 is specially formulated for extreme climates. Its nano-sealer technology deeply penetrates and reacts internally with cement, slowing moisture migration and efflorescence and intensifying bond capacity. Even in warmer climates HS 300’s slower evaporating solvents will not give a cotton candy effect before the applicator can finish a tight, smooth surface. A single coat application will provide a UV shield, enhance the beauty, and protect the surface of driveways, garage floors, patios, walkways, pool decks, and stucco.

HS 300 was made specifically in response to a growing need in climates that deal with very harsh and rapid freeze and thaw cycles. This premium acrylic sealer product penetrates into the surface of your concrete overlay and strengthens it by bonding with the cream layer of the concrete, making the entire slab much more durable and able to deal with the rapid moisture ingress and egress. While most homeowners and/or contractors have nearly written off acrylic sealers as protective coatings for their concrete overlay projects in freezing climates, anyone who tries our HS 300 product will think twice about leaving their beautiful sententious overlays unprotected.

Additional information




There are no reviews yet.

Be the first to review “Surecrete HS-300 (5 gal.)”

Your email address will not be published. Required fields are marked *

Needs to be cut when using a pump up sprayer.