Pro Spray Mix (One Component) – Stone Edge Surfaces

Spray Mix is a just add water polymer, “no-fiber”, very fine aggregate and additive enhanced concrete overlay mix that allows a 30 minute to 1-hour open time for spraying and troweling when applied over horizontal substrates. Spray mix is used in residential or commercial horizontal interior or exterior spray or trowel down concrete overlay applications to achieve spray texture (splattered) knockdown, thin coat, broom finish, and can be sprayed on vertical surfaces as well for troweling, and more.

BENEFITS
•”All in the Bag Mix”. No Liquid Polymers to add. Just add water on the Job.
•Reinforced With Latest, State Of The Art German Engineered Polymers.
•Polymers used are very “hydophobic”. Will not weaken or re-emulsify in standing water.
•Many methods of application, i.e., spray texture, stencils, stamps, troweled or free-hand
•Warranted bond ability
•Moisture tolerant and breathable
•Very low influence from concrete vapor emission
•Contributes to USGBC credits under LEED rating system.
•Abrasion and wear resistant
•Low maintenance costs •Wide range of textures and colors
•Water clean up

Approximate Surface Area Coverage for Spray texture: 100-125 sqft per bag of Pro Spray Mix

Pro Spray Mix Approximate Surface Area Coverage for Stamp-able Overlay System: Applied Thickness:

Coverage:
1/4“ 27 sq/ft
3/8″ 18 sq/ft
1/2″ 13.5 sq/ft

Color: Gray or White

Size: 50 lb Bags

Description

Technical Data Sheet

 

 

Stone Edge Surfaces Pro Spray Mix (sprayed concrete) is a polyacrylate, modified cementitious, overlay system that can be sprayed upon horizontal and vertical substrate interior as well as exterior to achieve textured, skip-troweled, or knockdown appearance. It can also be applied over concrete, wood or metal to achieve the appearance stone, wood, tile or brick. It is a water-phase elastomeric resin composition incorporating resin primers, cement, cement modifiers, polymers, aggregates. The components are supplied in a 50 lb. bagged mix of polymer, cement, aggregates and additives. All necessary ingredients are contained in the bag with water being added on site. It is typically used as a spray-texture for flooring, decking, driveway, patio, and sidewalk resurfacing in both commercial and residential applications. It’s use can be enhanced by incorporating the use of pigments, stains, and sealers to finish the coloring and sealing process. Pro Spray Mix can be used as a full thickness stamp-able overlay system as well as for concrete countertop resurfacing. Pro Spray Mix can be installed vertically to form an integral covered baseboard or stair risers. It can be used with stencils, stamps, troweled, sprayed, or worked freehand.

APPLICATION
  • Base/Top Coat: Top Coat (also used as Base Coat)
  • Thickness: Thin, 1/32” to 1/8” Max
  • Application Method: Mortar Sprayer, Trowel
  • Working Time: Average 30 Minutes to 1-Hour (depending on application process, temperature, and thickness)
PRODUCTS USED WITH
  • Primer 100 & Primer 110 
  • Liquid Colors & ColorPax
  • Stains & Sealers
MOST COMMON USES

• Spray Texture Knockdown Finish Horizontally
• Spray Texture Knockdown Finish Vertically
• Spray Texture Finish Horizontally
• Spray Texture Finish Vertically
• Thin Coat Finish
• Thin Coat Broom Finish
• Base Coat for Stenciling
• Base Coat for Tape Down
• Pool Deck
• Driveway
• Patio

COMMONLY APPLIED OVER

• Stable Substrate
• Concrete
• Wood (see over wood application video)
• Linoleum
• Tile
• Painted Surface
• Styrofoam
• Cement Board

Additional information

Size

50 lb bag

Color

Grey, White

Reviews

There are no reviews yet.

Be the first to review “Pro Spray Mix (One Component) – Stone Edge Surfaces”

Your email address will not be published. Required fields are marked *