Modifier 500 – Stone Edge Surfaces

∙Unique Flexural qualities
∙Warranted bond ability
∙Increases bond strength
∙Improved work-ability
∙High chemical resistance capabilities ∙Reduces cracking potential
∙Moisture tolerant and breathable
∙No volatile organic compound emission
∙Contributes to USGBC credits under LEED rating system
∙Water clean up
∙Abrasion and wear resistant

Comes in 5 gallons


Technical Data Sheet


Stone Edge Surfaces Modifier 500 is a water-based, ethylene-vinyl, acetate copolymer, acrylic modifier to be mixed within the composition of concrete and cement mixes to achieve unique and high quality flexural and bond strength capabilities, as well as user friendliness and workability. Modifier 500 also creates lasting strength and insulation qualities within concrete and cement mixes. Modifier 500 should be added primarily to Stone Edge Surfaces Micro-flex product line to be used as a micro-topping over concrete surfaces. It may also be used within a base coat of Stone Edge Surfaces Overlay mix over wood substrates,  Spray mix for spray textures, or a crack bridge system over concrete substrates mixed with Stone Edge Surfaces Overlay Mix.  Modifier 500 may also be added to cement-based mixes of concrete, mortars, plasters, and stuccos, to: increase their bond strength; improve workability, adhesion, and chemical resistance properties; and freeze thaw flexibility. It is a mixing additive within concrete and cement mixes for exterior, interior, above grade, and below grade applications. Modifier 500 greatly reduces cracking or crazing permitting applications at any thickness from feather edge to deep fill.

Additional information


5 gallons


There are no reviews yet.

Be the first to review “Modifier 500 – Stone Edge Surfaces”

Your email address will not be published. Required fields are marked *