Surecrete DK 400 WB Polyurethane

Water Based Urethane. Looks like polished concrete on a plain or stained concrete floor. Use straight or cut with water. A deep penetrating sealer, long lasting, chemical resistant, and no smell.

Tip: Can be diluted 100% and also made for a low-cost sealer.

Description

DK 600WB is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing clear coating for concrete, cement based overlays, or as a top finish coat on epoxy systems. The high performance clear top coat, available in gloss or satin finish, provides the durability of a solvent base system with the ease and safety of a low VOC (73 g/L) water base system. Unlike nearly all polyurethanes, Dura-Kote Polyurethane WB has remarkable properties related to vapor permeability that permit its use in an exterior setting. Note: See paragraph 5 under Surface Prep. Generating the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance, it is both user-friendly and extremely durable. As a vertical wall coating, it enhances anti-graffiti properties. Dura-Kote Polyurethane WB is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

For interior coatings, especially in areas or environments in which you are looking for an eco-friendly coating, Dura-Kote Polyurethane WB can be an extremely effective sealer for your concrete projects. With a VOC rating that will allow it to be placed in 99 percent of all states and municipalities, Dura-Kote Polyurethane WB is an ideal coating for generating LEED points and earning Green Projects as a professional applicator. If you’re a homeowner or DIY weekend warrior looking to do some work on your home but need to eliminate odor and lower the chemical vapor residue released by your concrete project.

Additional information

Size

5 gallons, 1 gallon

Mixing Ratio

3:1 (3 part A to 1 part B)

Coverage

Approximately 300 – 400 ft² per gal.
(28 – 37m² per 3.8 liter) 4 – 5.3 mils wet; 2 – 3 mils cured