For Prices and to Place an Order, Call 801-222-0808
Visit Us On TwitterVisit Us On FacebookVisit Us On Google Plus

Surecrete SureStamp – White – (Winter) 50 lbs.

please call for prices (801)222-0808

1 – 50 lb. (22.7 kg) bag of SureStamp
15-18 ft² @ 3/8” (1.4 – 1.7 m² @ 9.5mm)
20-24 ft² @ ¼” (1.9 – 2.2 m² @ 6.35mm)





SureCrete’s SureStamp is a stampable cement-based topping for beautifying both interior and exterior concrete surfaces. For existing plain concrete, it creates textures that resemble a whole array of designs: tile, cut stone, slate, boardwalk, brick, cobblestone, etc. with traditional concrete stamping tools. Costly tear-out and replacement of existing concrete is eliminated. SureStamp offers restoration, repair, resurfacing, architectural accenting, and surface protection of existing concrete. SureBond (see TDS) a cement-based bonding agent, must be used in combination with SureStamp to achieve the ultimate adhesion essential in a stampable overlay. It is seasonally user-friendly, available in Summer and Winter mixes.

SureStamp’s ability to create incredible three-dimensional textures makes it the perfect outlet for artistic inspiration. Designs using SureStamp has been used to create themed flooring and textures in many theme parks and resorts including Walt Disney World, Universal Studios Orlando and Busch Gardens of Tampa, Florida. With the ability to apply a wide array of pre-made rubber stamping molds and textures including faux stone, brick and even custom stamp texture patterns, as well as being able to manually manipulate your surfaces for custom-carved concrete make SureStamp an incredibly versatile product for creating artistically themed concrete and exhibits.


There are no reviews yet.

Be the first to review “Surecrete SureStamp – White – (Winter) 50 lbs.”

Your email address will not be published. Required fields are marked *

SureStamp can be manipulated for a wide range of finished textures, but here’s how you get started:

  1. Any surface receiving a cementitious coating must be clean, cured, sound and profiled. See our Surface Preparation products for more information on accomplishing this
  2. Make sure that temperatures will remain between 50 and 90 degrees Farenheit and there will be no precipitation in the applied areas for a 48 hour period following application.
  3. Add Approx 3.5 quarts water per 50 lb bag to 5 gal bucket and mix in any color desired for integral coloring of SureStamp
  4. Slowly introduce SureStamp while continuously mixing and mix for a minimum of 1 minute once all product has been emptied into container. Scrape the sides of the bucket to make sure there are no “dry pockets” that didn’t get mixed properly.
  5. Mist the surface of the concrete with water ahead of any areas about to receive SureStamp.
  6. Before SureStamp can be applied, a coating of SureBond must be put down to ensure proper adhesion of the finished surface. Pour a generous ribbon of SureBond onto the surface and spread with squeegee over an area that corresponds to your next workable area of SureStamp
  7. While the SureBond is still wet, pour the mixed SureStamp onto the surface.
  8. Gauge rake the product to the appropriate height for selected texture/carving pattern (usually between 1/4″ and 3/8″).
  9. Smooth the surfcace of product with a metal squeegee or similar tool.
  10. Allow product to begin to dry, yet remain plastic. The surface will lose its wet sheen and yield to the touch with very little, if any, sticking to the finger.
  11. Surface is now ready to receive a stamp pattern or custom carving. Be sure to use a releasing agent on any tools used to manipulate the surface, and to clean releasing agents off of finished surface before next step.
  12. Once the surface has dried and cured sufficiently (approx 6-8 hours), it can accept stains and secondary colorants, and is also ready to receive a sealer. Typical outdoor applications would utilize a acrylic sealer from our SureSeal line of products.