To place an order, call 801-222-0808
Visit Us On TwitterVisit Us On FacebookVisit Us On Google Plus

Surecrete Deep Patch Mix

$28.75

1 – 50 lb. (22.7 kg) bag of Deep Level = approximately .46 ft³
OR 11 ft² @ ½” (1 m² @ 13 mm)
OR 5.5 ft² @ 1” (.5 m² @ 25.4 mm)

Description

Technical Data SheetMSDS

 

 

SureCrete’s Deep patch is a single component cement based chemical patching compound system providing a patch that goes from 1/8″ (0.32 cm) and up. Just add water. It offers superior bonding power to patch larger spalls in concrete floors, build ramps, repair loading docks, and parking lot pavement. Deep Level also performs well in filling low spots on horizontal surfaces and filling open areas (e.g. planters). The silicate aggregate size will eliminate the usual shrink cracks associated with topping mixes used for repairs. Contractors and DIY homeowners alike will want to take advantage of the benefits of Deep Level for their concrete patching projects. It can provide a suitable alternative to destroying old, damaged concrete and having to entirely repour a new slab. This product will allow you to simply remove the concrete areas that are too damaged to repair, and fill in those voids instead of replacing the entire substrate. This will also allow you to speed up your restoration process, as instead of having to wait 28 days for your freshly poured concrete to cure, you can start applying your finished flooring product on top of Deep Level the very next day.

Reviews

There are no reviews yet.

Be the first to review “Surecrete Deep Patch Mix”

Your email address will not be published. Required fields are marked *

  1. Clean your surface – Your concrete substrate should be completely clear of any grease, oil, old paint, etc., otherwise it will not form a good bond.
  2. While not always necessary, some areas may need to be profiled if they are exceptionally “tightly trowelled”. This can easily be done with another of our Surface Preparation products – SCR.
  3. Dampen the surface of your concrete (no puddles, though!). Then apply a thin coating of SureBond (associated product used as a bonding agent, mixed with water, sold separately) to a small work area so as not to let it dry out.
  4. Mix Deep Level with water thoroughly in a large bucket. You may need to agitate the mix while working to ensure it does not set up before you are able to apply it.
  5. Apply Deep Level to ONLY the work area where SureBond is present and not dry. Continue following these steps until all areas have been patched/covered to your satisfaction! Deep Level is typically trowelled into place, however application methods will vary depending on your project needs.