BENEFITS: ∙May be either sprayed or rolled onto surface like paint ∙Warranted Bond Ability ∙Moisture tolerant and breathable ∙Very low influence from concrete vapor emission ∙No Volatile Organic Compound Emission ∙Contributes to USGBC credits under LEED rating system ∙Abrasion and wear resistan
Flex-c-ment™ Microflex Mix is a polyacrylate, modified cementitious, overlay system that can be sprayed upon already textured concrete or manufactured stone both horizontally or vertically to leave the existing existence of texture while leaving a thin layer of cementitious product by which can be recolored. It is a water-phase elastomeric resin composition incorporating resin primers, cement, cement modifiers, polymers, aggregates. The components are supplied in a Part A, dry, 45 Lb. bagged mix of cement, aggregates and additives and a Part B liquid polymer modifier 500 in 5 gallon pails. Flex-c-ment™ Microflex Mix is typically used as a spraying method for leaving a paint-like thin layer of cementitious product over an existing textured surface for the purpose of recoloring and rejuvenation. Flex-C-Ment’s Microflex may be rolled onto an already textured concrete surface with a ¾” nap roller or may be sprayed with a Wagner type power sprayer from hardware store. If applying over flat surface such as Garage floor or similar flatness then Flex-C-Ment’s Microflex must be sprayed through Wagner type sprayer. Flex-C-Ment’s Microflex may be applied over already sealed or painted concrete as well as may be acid stained after application has cured for more that 5 days. It�s use can be enhanced by incorporating the use of pigments, stains and sealers to finish the coloring and sealing process. Flex-c-ment™ Microflex Mix may also be used to shoot or roll over existing countertops that may also be acid stained after 5 days. Flex-C-Ment’s Microflex may also be used as a crack fill if the presence of a hairline crack occurs in concrete surface
There are no reviews yet.
Your email address will not be published. Required fields are marked *
Your review *
Notify me of new posts by email.
A high solids acrylic-polymer modifier that will give increased strength, flexibility, and adhesion to most cement based products. Makes the cement product more waterproof, more stain resistant and will extend its life.