This clear, hi solids solvent based urethane sealer can be applied in one pass, thus saving time and money. It provides superior UV protection, chemical resistance, and makes for a tough and durable surface. Because this urethane is solvent based it is highly recommended that the installer use a respirator when applying this product. Smells quickly dissipate after application.
Epoxydoc Hi-performance urethane is used in garages, warehouses, and places where odor is not a factor. It is applied over epoxies, concrete, and other decorative concrete overlays. Epoxydoc Hi-performance urethane sealer is inexpensive and easy to apply. Its advantage over other urethanes is its ability to dry faster, ease of application, is cost effective, is super durable, and goes down in one pass. Epoxydoc Hi-performance hi solids urethane when dry leaves a deep, beautiful, clear finish.
Surecrete Dura-Kote Water-Based Pigmented Epoxy (ColorTec 600WB) (1 gal. or 5 gal.)$149.00 – $339.00
1st coat approximately 125 – 175 ft² per gal. put it on thin: 9 – 13 mils wet; 4.7 – 6.8 mils cured.
For smooth surface or second coat approximately 200 -250 ft² per gal. Again put it on thin :6.4 – 8 mils wet; 3.3 – 4 mils cured
Midwest Rake 24″ Complete Application Sqeegee with 1/8″ Notch$44.90
Surecrete Dura-Kote – 600WB – Water-Based-Pigmented Epoxy (1 or 5 Gal)$75.00 – $344.40
4:1 (4 part A to 1 part B)
Varies due to porosity of substrate
Linzer 9″ Non-Shed Roller Cover 3/8″$3.95